A clearer kind of clean. Independent choices. Everyday kitchen confidence.
Rinse & Rack

EXACT-PRODUCT REVIEW

Fisher & Paykel DD24DAX9 N Review

Two drawers make sense when you want to separate smaller loads rather than fill one large tub.

Fisher & Paykel DD24DAX9 N

As an Amazon Associate I earn from qualifying purchases.

01Our separate-load choice
Fisher & Paykel DD24DAX9 N
Double drawer43 dBA, standard cycle top drawer only

Double drawer

Fisher & Paykel DD24DAX9 N

The reason to choose a double DishDrawer is the way you wash, not a larger headline capacity. Two smaller compartments can suit households with uneven daily loads.

Check tall plates and pans carefully. A wide drawer is not equivalent to a tall conventional tub, and the stated plate limit matters.

The published 43 dBA figure is specifically for the top drawer’s standard cycle. We do not treat it as a directly comparable measurement of both drawers running.

Installation deserves advance planning. Have the installer verify hose routing, electrical requirements and cabinet clearances using the current documents.

Why consider it

  • Two separate loading spaces
  • Seven place settings per drawer
  • Included cutlery basket and kickstrip

Consider before buying

  • 11-inch stated plate limit in each drawer
  • Drawer height constrains cookware
  • Specialist installation layout
Specifications, contents & buying checks
Width
23 9/16 in
Height
32 5/16–34 5/8 in
Depth
22 9/16 in
Noise
43 dBA, standard cycle top drawer only
Capacity
14 place settings; 7 per drawer
Drying
Fan assisted
Electrical
110–120 V / 60 Hz; current US page lists 10 A

Contents & use

  • Cutlery basket and kickstrip.
  • Manufacturer specifies supplied inlet hose; confirm remaining installation pack against current manual.

Before you buy

  • Check plates and pans against each drawer.
  • Use current supplied installation instructions; older spec lists a different amperage.
  • Confirm local qualified service and installation.

Will two smaller loads suit your cookware?

The double drawer is most persuasive when your household benefits from separate loads at different times. Treat each drawer as its own loading space: the combined 14-place-setting figure does not create one tall cavity for a stockpot or large baking sheet. The stated 11-inch plate limit matters before you consider finish or controls.

The single DD24SAX9 N is the relevant comparison for smaller daily loads or a secondary kitchen. It offers one seven-place-setting drawer rather than two. Neither configuration makes an accessible installation automatic; cabinet position, support and service access still need planning. The double model’s published noise note refers to the top drawer on a standard cycle, so avoid treating it as a universal reading for every operating combination.

Compare before you choose

Choose the double model for two separate load spaces; choose the single only when one drawer’s capacity and purpose-planned installation meet the need.

Fisher & Paykel DD24DAX9 N and Fisher & Paykel DD24SAX9 N: documented differences
Buying checkFisher & Paykel DD24DAX9 NFisher & Paykel DD24SAX9 N
Width23 9/16 in23 9/16 in
Height32 5/16–34 5/8 in16 1/8 in
DryingFan assistedFan assisted
Capacity14 place settings; 7 per drawer7 place settings
Noise43 dBA, standard cycle top drawer only43 dBA

Manufacturer specifications and labelled product details; these are not side-by-side test results. Read the alternative assessment →